Would you like to replace your windows and doors? Do you know the important factors that can determine the replacement process? Regardless of your budget or the types of windows and doors that you want to install, certain factors affect the replacement. Therefore, kindly read this article to learn more about these crucial factors.
- Measurement of the windows and doors
Windows and doors come in different sizes; therefore, you must consider the size of your doors and windows as you are looking for a replacement. Failure to measure them properly can have adverse impacts on the installation which, in turn, may make the windows not fit where you want to install them.
Even if an experienced installer should install the improperly measured windows and doors, you will still encounter difficulties with these windows in the future. Therefore, accurate measurement is the first factor that can affect the replacement.
- Shimming
If you want to ensure that your window operates properly and lasts for a long time, you must ensure that the shimming is correct. Typically, the shims are installed around the anchorage to support the windows. Correct shimming goes a long way in holding the windows properly so that groans and creaks are prevented. Without shims, your windows will be difficult to open, close, or lock. However, there is no one-size-fits-all when it comes to shims, the best option relies on the designs and styles of the windows.
- Placement of the windows
This refers to where the window is positioned in the opening. You can either place the window nearer to the outside or nearer to the inside of the house. For homes with exterior walls that are 2 x 4, window positioning cannot be a problem because the wall thickness and window thickness are usually suitable for each other. However, the size of the jamb will determine the window positioning if the thickness of the wall is more than 2 x 4. Overall, you must understand that the placement of windows will affect the performance of your high-efficiency windows. Therefore, you must pay attention to this factor.
- Insulation foam
The placement of the insulation foam is another major factor that must duly be considered when you are installing replacement windows and doors. Proper window measurement also contributes to the placement of the insulation foam. The gap between the framing and the window frame must be perfect because being too wide or too narrow can lead to a plethora of issues. When it is too wide, the frame will be deformed and the operating units will not function effectively. If it is too narrow, your window will not be adequately insulated; hence, moisture may come into your home.
- Level, plumb and square
Level, plumb and square are the terms used for explaining the perfect alignment of windows. These terms show that the windows are perfectly aligned on the vertical planes and horizontal planes. Without level, plumb and square, the crank mechanisms, latches and sashes of your windows will never operate smoothly.
Don’t worry yourself about the factors; just make sure that you hire a professional window and door installer to help you.